La destinazione per lo shopping online più veloce al mondo
BANNINGER MALE THREADED MULTILAYER COMPRESSION CONNECTOR
€2.45
Tax Included
Straight >B< Flex Compression connector with one end for multilayer pipe and one male threaded end. Bänninger >B< Flex Compression in CW617N-DW brass for plumbing, heating and cooling. Max 10 bar, -10/+95 °C.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
BANNINGER MALE THREADED MULTILAYER COMPRESSION CONNECTOR
Straight >B< Flex Compression connector with one end for multilayer pipe and one male threaded end. Official C302 series provides the transition from multilayer piping to a threaded component or pipework.
Bänninger >B< Flex Compression fittings are designed for joining multilayer pipes by mechanical compression, without open flame or hot-work operations. The system provides a stable connection and is suitable for plumbing and building-services installations.
The body is made of natural-finish CW617N-DW brass. The nut and compression ring are also brass, while sealing is provided by double black EPDM O-rings compliant with EN 681-1. The range is resistant to corrosion, chemicals and pollution.
Official Bänninger documentation specifies use with hot and cold sanitary water, heating, cooling and oil-free compressed air. The fittings are manufactured to EN ISO 21003-3 and EN 1254-3, with a maximum operating pressure of 10 bar and an operating temperature range from -10 °C to +95 °C.
The EPDM sealing elements are suitable for the conveyance and distribution of water intended for human consumption. Where threaded ends are present, the range uses threads to UNI EN 10226-1 for pressure-tight joints on the thread or UNI ISO 228-1 for non-pressure-tight threaded joints, depending on configuration.
Technical specifications
Official series: C302
Configuration: F coupling / male thread
Thread: Male threaded ends to UNI EN 10226-1 where a pressure-tight joint is required
System: >B< Flex Compression
Body material: Natural-finish CW617N-DW brass
Nut and compression ring: Brass
Sealing elements: Double black EPDM O-rings to EN 681-1
Fitting standards: EN ISO 21003-3; EN 1254-3
Applications: Hot and cold sanitary water; heating; cooling; oil-free compressed air
Maximum operating pressure: 10 bar
Operating temperature: -10 °C to +95 °C
Range sizes: 16-32 mm
Manufacturer warranty: 10 years when professionally installed and used according to instructions
313-DC302-0416
Specific References
No customer reviews for the moment.
8 other products in the same category:
Straight >B< Flex Compression connector with one end for multilayer pipe and one male threaded end. Bänninger >B< Flex Compression in CW617N-DW brass for plumbing, heating and cooling. Max 10 bar, -10/+95 °C.